Where To Put Baby Monitor? Top Full Guide [2022]

There are a few things to consider when it comes to where to put baby monitor. The most important thing is to make sure the monitor is safe where it can’t be knocked over or pulled down. You also want to make sure the monitor is within reach so you can easily see and hear your baby unit.

Things to Consider: How To Properly Place A Baby Monitor

When designing your nursery, consider the following two factors to determine the optimum location for your video baby monitor:

• Health and security
• Correct viewing angle

Baby camera placement: Health And Safety

Baby monitors emit, particularly wireless video monitor cameras should be set at least 6 feet / 1.8 meters away from your kid. This is the recommended minimum baby’s safety tips distance for limiting exposure to electromagnetic radiation.

According to studies on digital cordless baby monitors, monitors less than 3.2 feet / 1 meter away from a baby’s crib safely cot generate almost the same radiation as a mobile phone tower 500 feet / 150 meters distant.

And, if your television monitor comes with a power wire, as almost all do, you must be especially cautious to avoid strangling dangers (more on that below).

Baby camera location: Proper Viewing Angle

Your camera’s viewing camera angle is the second most critical element when positioning your video baby monitor safely in the baby’s room. You want as much uninterrupted view of the cot as possible to observe your baby napping.

The camera’s viewing angle may fluctuate depending on your purchased first baby monitor. In our testing, the Eufy SpaceView and the Nanit Plus monitors, for example, had the largest viewing angles and so covered most of your baby’s bedroom.

Some baby monitors also have a remote pan, tilt, and zoom feature, which is useful for maintaining control of the viewing camera angle as your kid grows and travels about their baby’s room. The zoom option is especially useful if you have a wide-angle camera remotely and want to view your kid in the cot.

Fix Your Baby Monitor Camera To The Wall – Where To Put Baby Monitor

A video baby monitor placement should be installed on the wall since it is the most secure location. When you attach the monitor to the wall, you or your kid are less likely to knock it over and damage it.

You will also have a better view of the whole nursery and the cot.

You have many choices for mounting the baby monitor cords on the wall:

Baby Monitor Wall Mount

Many video baby monitors provide a wall mount option. It might be incorporated into the baby monitor or an optional element included with the package.

Some monitors were designed to be wall-mounted. They will have a safe and simple wall more basic mounting system. Take, for example, the nest cam.

Others feature a simpler mounting mechanism. It might be as basic as a hole in the base’s bottom. I recommend using double-sided tape to fasten the baby monitor cords to the wall in this scenario.

How To Mount A Baby Monitor On The Wall?

To begin, you should choose the optimum location for your display. This location will provide you with a birds-ey perspective of the crib.

It’s also good to view the playground and the doors and windows. You’ll know whether the drapes are still open or if your cat is still in the room.

I hung the baby monitor angle at the top of the wall in my son’s room like a security camera. I can tilt it down and see the whole crib and the play area.

Pro tip: use a baby monitor ladder to avoid drilling unnecessary holes in the wall and attempt to locate the optimal angle while holding it.

Mount a baby monitor that must be hooked into an electrical socket. Check that it can reach the outlet. It is not advisable to use a baby monitor extension cord. They are just too appealing for toddlers to play with. They may stuff it with toys or wrap it around anything.

It is critical to secure all wires to the wall. The unsecured wire poses a strangling hazard. I realize your infant is probably too little to move about and grab for things yet, but I recommend you try it now. Many parents will put off baby proofing the room, and they will almost certainly forget. The additional work is worth it for your child’s safety.

A cord cover may be used to secure the wire. It’s a hard plastic tube that you attach to the wall and feed the wire through. A similar approach may be used for the cable that runs down the floor.

The cable should be routed in a corner, behind a library, or a large curtain.

If the sight of a wire running down the wall bothers you, you may go the additional mile and run it within the wall. This will undoubtedly look prettier and be safer for your child.

Before you mount your baby monitor to the wall, keep in mind that it will be difficult to remove the video monitor after it is attached to the wall. If your infant is a baby unit sleeping outside of his room, this might be an issue. It may be on a visit to friends or while on vacation. It was not an issue for us since we added pair of monitors that were accessible.

Here’s another mounting option to consider if you don’t want to attach it to the wall permanently.

Install Your Baby Monitor On A Shelf

It is easy and safe to keep your baby monitor on a shelf.

It’s practical since you don’t have to connect it to the wall or furniture. You may move it around the nursery or into another room in a flash. When you need to access your monitor, this is a fantastic alternative.

You may wish to adjust the camera’s angle to better view the crib at night or the play area during the day. Yes, certain video monitors can remotely adjust the camera, but they are usually more costly.

In addition, you should generally purchase one monitor. This means you’ll have to bring it when you see friends with your infant.

It’s secure since your child won’t be able to reach the shelf and start playing with the monitor. However, please do not set it above the crib since the monitor may fall into the bed.

If you don’t already have one in the nursery, you may purchase a tiny shelf or obtain a shelf designed specifically for most baby monitors.

Small Shelf For Baby Monitor

Any hardware or home décor shop will have a tiny shelf. A low-cost corner shelf may be found at Home Depot for less than $10. I would suggest fastening the monitor with two pieces of face tape. Alternatively, a baby monitor clip or stand might be used.

Baby Monitor Shelf

Baby monitor shelves are also readily available on Amazon, and they are reasonably priced. They are precisely designed to hold a baby monitor securely. They will also have a hole through which to pass the wire through. Furthermore, most of them offer a security mechanism to hold your monitor in place without tape.

Some relevant posts:

• Does Baby Powder Cause Cancer? Complete Guide 2023
• Best Baby Breathing Monitor: Keep Baby Safe and Sound 2023
• Is Wifi Safe For Babies? Top Full Guide 2023
• How To Help Choking Baby? Top Full Guide [2022]
• Check Neighborhood Safety 2023: Top Full Guide
• Is Daycare Safe For Infants 2023? Top Full Options Here!

FAQ

How close should the baby monitor be?

The most important thing to remember is to keep your baby monitor at least three feet away from the crib, bed, or play area.

Install your monitor far away from your child and secure the cable so they cannot play with it.

Also, make sure it is not over your child’s crib or anyplace over their head.

I would never recommend putting a monitor inside a crib.

We placed our monitor across the nursery and could hear everything inside the bedroom, even on the loudest level.

Furthermore, baby monitors generate signals that may be detrimental to your child. Experts are still assessing the danger of exposing young children to electronic devices and the impact on their brain development. I am not comfortable taking such a risk with my child, and I hope you are.

Baby monitor cord safety

As of 2002, seven children have died due to strangling caused by baby monitor cables. In addition, three people were almost strangled. To avoid more deaths or injuries, the producer of baby monitors recommends that parents take the necessary precautions to secure the monitor cable.

Don’t forget to secure the monitor cord while installing your new baby monitors. It would help if you did it on the first day. Because you never know when your child will become more active, begin exploring his room and locating it.

Here are some safety precautions you should take:

Baby monitor cord cover

Plastic covers for baby monitor wires are available at hardware stores and Amazon. They are the same covers used to conceal wiring in hospitals and schools (for example, TV).

Affix it to the wall and put the wire through it. You may paint over it with the same colors as your walls to mix it in with your décor.

Baby monitor cord clip

At first, you may consider stamping the cable to the wall or using a cord clip. Clips are choking dangers and should be avoided. Your child might play with it, get free, and the next thing you know, you’re in the hospital with your child. They’re better than nothing, but it’ll be safer if you obtain a cable cover.

How to hide the baby monitor cord?

Cord coverings are useful, but they are not visually appealing. That plastic cover on the wall may impact the Pinterest-worthy appearance of your nursery.

Perhaps you could arrange the monitor or furniture so that a library or a curtain will disguise the cable.

The cable might be routed inside the wall. You’ll need to drill two holes in the wall: one behind the monitor and one at the bottom. You tie the monitor cable to a piece of fish tape and slide it from top to bottom.

How to hide a baby monitor?

Having a video baby monitor might make you feel like you’re watching a security camera. When decorating a child’s room, you want to create a warm and friendly environment. The opposite effect is produced with a security camera.

That is why you may wish to conceal your baby monitor.

Some monitors, such as a nanny cam, are video monitor cameras concealed behind plush toys. They are designed to be concealed, and all you have to do is put them in a library or on a shelf.

You may even make your DIY version by concealing the camera inside an item. It might be hidden inside an artificial plant, a plush animal, a box of Kleenex, or a bookshelf.

You can preserve that warm and friendly vibe in the room by making your monitor more inconspicuous or undetectable.

Conclusion

The most important thing is to find a place where the monitor will have a clear view of the baby’s crib or play area. You’ll also want to make sure the monitor is within range of an electrical outlet and out of reach of curious toddlers. Once you’ve found the perfect spot, you can relax and enjoy peace of mind knowing your little one is always within view.