The future is undoubtedly headed toward cordless devices. It is for this reason that Bluetooth technology has revolutionized our increasingly digital environment. If you own a pair of bluetooth headphones, you probably have many times wondered why do my bluetooth headphones keep cutting out?
It’s that jerky way that audio does when you’re watching a video or listening to music. It can be at the very least disorienting to the senses. But if done often, it might make you genuinely angry.
Contents
Why Your Bluetooth Headphones Keep Cutting Out
Bluetooth is a great way to listen to music and watch videos without wires, but sometimes the connection can be unreliable.
Many users of Bluetooth headphones or speakers experience audio stuttering, choppy sound and audio dropouts, which can be incredibly frustrating. If you’re wondering why your Bluetooth headphones keep cutting out, read on. Here, we’ll examine some of the most common causes for Bluetooth audio dropouts and provide tips for troubleshooting the issue.
Source Devices Issues
Numerous devices, including PCs, laptops, tablets, and smartphones, can connect to Bluetooth headphones.
While the source device you’re streaming from might not always be ready to pair, your headphones probably are. There could be a number of issues affecting your source device’s Bluetooth signal.
One possibility is that you failed to verify if Bluetooth was indeed turned on. As previously stated, even if your headphones are the convertible variety that include a 3.5 mm jack aux cord, the feature will still be activated automatically on your device. But unlike your headphones, they start working right away.
The source device might not be actively looking for partnering devices even if you keep the Bluetooth capability turned on.
Additionally, the greatest results are typically obtained by manually locating your headphones on the list of Bluetooth devices that are accessible for connecting.
The battery on your source device would be depleted if you made it constantly look for Bluetooth signals.
A low battery charge could be a factor in the communication problems if the questioned device doesn’t have a constant power source. Therefore, keeping your gadget plugged into an outlet might not be a bad idea.
Finally, having an excessive number of open programs or apps could damage your Bluetooth connection. The software might use up additional battery power.
The data transfer between your device and your wireless headphones could also be slowed down by the processing resources your device is squandering on the unused apps.
Problems With The Headphones
Low Battery
If your source device is working properly, a problem with your headphones may exist. Your wireless headsets, for instance, may experience a low battery condition. Another possibility is that the issue is just the distance between it and the source device.
You’ll first need to determine the battery life that you can anticipate from your headphones. You should already be aware of whether you can get five, eight, or more hours of playback from them if you’ve been using them for a long period.
The battery’s durability might be impacted by the volume of your music as well as how often you use the microphone. So bear that in mind and shorten your calls if you want to get the most out of your wireless headset.
In the end, when you attach your headphones, you’ll be able to check their battery level on the screen if your source device is a more recent smartphone. Therefore, it ought to be simple to determine whether they need to be charged.
Of course, if the battery within your headphones were failing, there would be little you could do. Your wireless headphones’ battery shouldn’t be dying if they’re still quite new.
Poor battery life would be expected if you bought a cheap pair, though. So, that could be the cause of your flickering Bluetooth connection.
Out of Range
On the other hand, it might be brought on by something as simple as distance. Your audio might be stuttering if you’re attempting to connect your headphones to a source device that is not within their range.
While the ranges of different Bluetooth versions vary, if you want to establish a strong signal, you shouldn’t be pushing those boundaries.
Bluetooth Version
Since the first Bluetooth-enabled headphones initially appeared on the market in 2004, their actual range has been growing. Some wireless headphones’ greatest range in the past was just a few feet. Some more recent models, however, claim to have a physical range of roughly ten yards!
Otherwise, the range of Bluetooth technology has remained constant for several generations. The range of versions 2.1 and 4.0 was roughly 110 yards, or just under 100 meters.
But now that Bluetooth 5 is here, we theoretically have 400 meters of space to work with. However, there are still certain advantages to carrying out tasks the traditional way.
In particular, your headphones will be more likely to connect to a nearby device that also uses the older version of Bluetooth if the source device has the most recent version but they are still using an older version.
However, such a device would have to be nearby for it to occur. Additionally, a Bluetooth function that is activated would be required.
Your headphones won’t care either way if they are Bluetooth 5 devices, of course. Instead, they should just connect to the nearest device, however there are a few techniques to make sure they pair with the correct one.
On that, however, later. Let’s focus on the final set of challenges you might encounter for the time being.
Outside Interference
The likelihood that another device is interfering is also very real. Multiple devices can connect to some Bluetooth headphones. The Bluetooth will use the primary connection if there is someone else in the room attempting to reach the same device.
Some will instantly link with any Bluetooth headphones that are in their proximity. You should review the manufacturer’s pairing instructions in your device manual to prevent this from happening.
When using Bluetooth headsets while driving, you could experience interference from other vehicles and mobile devices. That’s because these wireless devices require a specific spectrum to operate. When many devices attempt to use the same spectrum, disconnections occur.
Because they are considerably less likely to have this issue, purchasing higher-quality Bluetooth headphones is the best choice in this situation.
How to Fix Wireless Headphones Cutting Out
Check Battery
If you’ve used your wireless Bluetooth headphones for a while, you may have noticed that the sound stutters when the battery is running low. If that’s the case, your headphones require a specific amount of charge to function properly. Make sure they are always charged, and the problem will go away.
It could be time to get a new battery if you’ve been using the headphones for a long time and they don’t hold a charge like they once did.
Keep Your Headphones in Range
With the use of Bluetooth technology, data is sent via brief radio frequency ranges. Your wireless Bluetooth headphones will stop playing music when you leave their range. A subsequent move will result in an end to the relationship.
To find the number, check the owner’s manual or the manufacturer’s website. Many Bluetooth gadgets operate without issue up to four or five feet from the source device (such as a phone, laptop, or Bluetooth music system).
Check if The Bluetooth Version Match
New Bluetooth headphones paired with an old Bluetooth source unit may cause audio crackling.
Consider the active noise-canceling TaoTronics SoundSurge 46 headphones. The pair is equipped with Bluetooth 5.0, the newest and fastest Bluetooth technology available. If you paired them with an outdated Bluetooth 2.0 device, the incompatibility could result in stuttering issues.
Avoid Places with High Wi-Fi Usage
You might not be aware of this, but Bluetooth and Wi-Fi both use the 2.4 GHz–2.5 GHz frequency range.
Wi-Fi routers, microwaves, cordless and hands-free phones, baby monitors, and wireless Bluetooth headphones are just a few examples of the numerous wireless gadgets available thanks to modern technology.
Despite their differences, the two technologies share a network. They can therefore obstruct each other’s data transfer channels. If you use your Bluetooth headphones in an area with plenty of Wi-Fi devices, you can notice Bluetooth audio stutter.
Use your headphones in spots with less Wi-Fi activity to get around this problem and check to see if the Bluetooth audio stutter disappears. Remove any unused Bluetooth connections as well.
FAQs about Why Do My Bluetooth Headphones Keep Cutting Out
Bluetooth headphones cut out when I turn my head?
The problem with your Bluetooth headset is something called restricted line of sight. Because your phone is in your back pocket, your body may galvanically overwhelm the source of your signal.
What interferes with Bluetooth?
Interference can be produced by appliances such as microwaves, wireless speakers, and baby monitors. Your Bluetooth connection is also impacted by Wi-Fi routers. The gadget that’s generating the interference should be easy to find once you’ve completed the preceding step.
Why is Bluetooth so unstable?
Bluetooth switches among various frequencies. As a result of carrier frequencies dropping off as you move, the connection may need to be reprofiled. This automatically occurs, although it may temporarily choppy the audio or even totally stop it.
Conclusion
The issue of bluetooth headphones cutting out is an annoying and inconvenient one, but it doesn’t have to be that way. By following the steps outlined in this blog post, you can easily figure out what’s causing the issue and get back to enjoying your tunes without interruption.
If you’re still struggling with the issue, however, don’t hesitate to contact a professional for help.
Thank you for reading this hereOfamily article.
